361, WHITE, 55M X 25MM 数据手册
Page 1 of 4
3M™ Glass Cloth Tape 361
Last Revision Date: March, 2021
Product Description
3M™Glass Cloth Tape 361 is coated with a silicone adhesive for many applications requiring high temperature resistance, high adhesion and a very strong, abrasionresistant backing.
Product Features
• Can be certified to meet FAR 25.853 (a) Appendix F Part I (a) (1) (ii), flame resistant specification.
• Can withstand intermittent temperatures up to 550°F (288°C) or higher, depending upon the type and duration of the heat source.
• Continuous exposure to temperatures above 450°F (232°C) will gradually degrade the adhesive causing loss of tape adhesion and darken the glass cloth backing.
Technical Information Note
The following technical information and data should be considered representative or typical only and should not be used for specification purposes.
Typical Physical Properties
Property
Values
Additional Information
Backing
Glass Cloth
Adhesive Type
Silicone
Color
White
Backing Thickness
0.13 mm (5 mil)
View
6.4 mil (0.16 mm)
View
0.16 mm
View
5 mil
View
Test Method: ASTM D3652
Total Tape Thickness
Test Method: ASTM D3652
Total Tape Thickness
Test Method: ASTM D3652
Backing Thickness
Page 2 of 4
Test Method: ASTM D3652
Typical Performance Characteristics
Property
Values
Additional Information
Tensile Strength
255.7 N/cm (146 lb/in)
View
4.2 N/cm (38 oz/in)
View
38 oz/in
View
146 lb/in
View
9%
View
Test Method: ASTM D3759
180° Peel Adhesion
Test Method: ASTM D3330
Notes: 12 in/min (300 mm/min)
180° Peel Adhesion
Test Method: ASTM D3330
Notes: 12 in/min (300 mm/min)
Tensile Strength
Test Method: ASTM D3759
Elongation at Break
Test Method: ASTM D3759
Long Term Temperature Resistance
232 °C (450 °F)
Minimum Long Term Temperature Resistance
-54 °C (-65 °F)
Long Term Temperature Resistance
450 °F
Minimum Long Term Temperature Resistance
-65 °F
Available Sizes
Property
Values
Standard Roll Length
55 m (60 yd)
Additional Information
Page 3 of 4
Standard Roll Length
60 yd
Standard Width
13, 19, 25, 38, 50, 75 mm (1/2, 3/4, 1, 11/2, 2, 3 in)
Standard Width
1/2, 3/4, 1, 11/2, 2, 3 in
Storage and Shelf Life
Store under normal conditions of 60° to 80°F (16° to 27°C) and 40 to 60% R.H. in the original carton.
To obtain best performance, use this product within 24 months from date of manufacture.
Industry Specifications
Can be certified to meet FAR 25.853 (a) Appendix F Part I (a) (1) (ii)
Bottom Matter
3M
Industrial Business
Industrial Adhesives and Tapes Division
3M Center, Building 225-3S-06
St. Paul, MN 55144-1000
800-362-3550 • 877-369-2923 (fax)
www.3M.com
Handling/Application Information
Application Examples
• High temperature applications requiring high tensile strength, good holding power and abrasion resistance.
• Permanent sealing of high temperature ducts or chambers.
• As a back up strip for submerged arc welding.
• Applications requiring heat treatment followed by clean removal of the tape with little or no stain.
References
Property
Values
3m.com Product Page
https://www.3m.com/3M/en_US/company-us/all-3m-products/~/3M-Glass-Cloth-Tape-361/?
N=5002385+3293242770&rt=rud
Safety Data Sheet SDS
https://www.3m.com/3M/en_US/company-us/SDS-search/results/?
gsaAction=msdsSRA&msdsLocale=en_US&co=ptn&q=361
Family Group
Link Tags:
361
Minimum Long
Long Term
Backing
Products
Backing
Adhesive Type
Total Tape
Tensile
Color
Term
Temperature
Thickness
Thickness
Strength
Temperature
Resistance
Resistance
Page 4 of 4
361
Glass Cloth
Silicone
White
0.13 mm
0.16 mm
255.7 N/cm
450 °F
-54 °C
ISO Statement
This Industrial Adhesives and Tapes Division product was manufactured under a 3M quality system registered to ISO 9001 standards.
Information
Technical Information: The technical information, guidance, and other statements contained in this document or otherwise provided by 3M are based upon records, tests,
or experience that 3M believes to be reliable, but the accuracy, completeness, and representative nature of such information is not guaranteed. Such information is
intended for people with knowledge and technical skills sufficient to assess and apply their own informed judgment to the information. No license under any 3M or third
party intellectual property rights is granted or implied with this information.
Product Selection and Use: Many factors beyond 3M’s control and uniquely within user’s knowledge and control can affect the use and performance of a 3M product in a
particular application. As a result, customer is solely responsible for evaluating the product and determining whether it is appropriate and suitable for customer’s
application, including conducting a workplace hazard assessment and reviewing all applicable regulations and standards (e.g., OSHA, ANSI, etc.). Failure to properly
evaluate, select, and use a 3M product and appropriate safety products, or to meet all applicable safety regulations, may result in injury, sickness, death, and/or harm to
property.
Warranty, Limited Remedy, and Disclaimer: Unless a different warranty is specifically stated on the applicable 3M product packaging or product literature (in which case
such warranty governs), 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product. 3M MAKES NO OTHER
WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, OR ARISING OUT OF A COURSE OF DEALING, CUSTOM, OR USAGE OF TRADE. If a 3M product does not conform to this
warranty, then the sole and exclusive remedy is, at 3M’s option, replacement of the 3M product or refund of the purchase price.
Limitation of Liability: Except for the limited remedy stated above, and except to the extent prohibited by law, 3M will not be liable for any loss or damage arising from or
related to the 3M product, whether direct, indirect, special, incidental, or consequential (including, but not limited to, lost profits or business opportunity), regardless of the
legal or equitable theory asserted, including, but not limited to, warranty, contract, negligence, or strict liability.
Disclaimer: 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.
Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers
(e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be
selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions,
warnings, and limitations, and the user must take any action required under any recall, field action or other product use notice. Misuse of 3M industrial and occupational
products may result in injury, sickness, or death. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject
matter expert. For additional product information, visit www.3M.com.